-
MODEL:REX-C700FK02-V*ANRANGE:0 to 400 °c KOUTPUT: SSRSupply:100 TO240VAC 50/60HZWeight: 248gType: K TypeTemperature Range: 0-400°C(32-752°F)Thread Diameter: 6mm / 0.23"Internal Insulation: FibreglassExternal Shielding; Metal ShieldTotal Length: 1M / 39"Fork Terminal Spacing :3.5mm / 0.13"Color :As Picture ShownWeight :35gPackage: 1× Temperature Controller, 1 x Type K Thermocouple -
Easy to install and convenient to use. Fit for 3D printers, engraving machine, stepper motor driving guide rail，Application of machine tool guide rail and other equipment -
Sale!
HGH15CA/HGW15CC slide block
Easy to install and convenient to use. Fit for Plsma Cutter Machines,3D printers, engraving machine, stepper motor driving guide rail，Application of machine tool guide rail and other equipment -
Zinc Alloy Seated Bearings
Easy to install and convenient to use. Fit for Plsma Cutter Machines,3D printers, engraving machine, stepper motor driving guide rail，Application of machine tool guide rail and other equipment -
Out of stock
The DIY three-coordinate probe can realize the functions of fast positioning, edge finding, center finding, shape measurement and so on by connecting the CNC to the knife edge, which greatly solves the trouble of positioning the workpiece during the second clamping during the machining process. Working voltage: 5-24V wide voltage Indicator light: green light when power on, red light after trigger The shell is made of fine frosted black oxidized aluminum alloy, flat anti-roll design, and the stylus handle is machined in stainless steelAdapt to various control boards/boxes such as grbl control board and Mach3
-
Out of stock
Specification:
Output mode: NC (normally closed) Almost 0 before the trip Stroke: 5mm Repeat positioning accuracy: 0.001mm (working speed: 50-200mm/min) Life: 3000000 times Contact force: 1.5N Shell grinding: 4S Protection level: IP67 Cutter diameter: 20mm Material: Hard alloy. Out of specification: NC (normally closed), distance signal is about 5mm Impact level: DC24V 20mA (MAX) 10mA (resistive load)
Features:
1. Waterproof and dustproof structure, with good durability in CNC machining operations. 2. It can greatly improve the tool setting efficiency in CNC machining. 3. When the stroke is exceeded, it will sound an alarm. 4. Automatic detection of tool damage: If the tool is damaged or broken, the machine will automatically stop running and issue a warning. Automatic tool wear compensation: Once the tool head wear is detected, the relevant program can be corrected to ensure the accuracy of the workpiece.
Installation Notes:
1. The pillar and the tool setting device must be perpendicular to the contact surface and perpendicular to the contact surface. Please install them on a workbench with small iron filings as much as possible. 2. Make sure to use the voltage within the rated power supply range, please control DC10-30V, the current is less than 20mA, and the ambient temperature range is -25°C-70°C. 3. Please control the tool diameter to be less than 20mm, and the cutting speed to be less than 50-200mm/min. The center of the tool should fall on the center of the tool face.
-
Detection distance 5MM. Operating voltage: DC: DC6 ~ 36V or DC12V-DC24V Output Type: NPN type Output status: normally open Detection of objects: Metal objects are welcome to use -
SPECIFICATION:Product Name: HSS Cobalt Twist Drill BitsType : Drill BitMaterial : 304 high speed steelManufactured: DIN338Size:1-10mm -
Specifications:-
Model: Rosin Solder Paste Flux
-
Weight: 100g
-
Scope of application: suitable for mobile phone, PC card and other precision electronic chip-level flux soldering.
-
-
Description: Good solder-ability, non-halogen,no spattering and non-corrosive. Bright and full soldering points, convenient to use. Anti-oxidation and anti-corrosion. Widely used in electronics repairing work. Specificaton: Tin(Sn): 60% Lead(Pb): 40% Flux: 2.0% Diameter: 0.5-1.0 mm Weight: about 50 g -
ATMEGA128 ATMEGA128-16AU TQFP64 IC 1PCS -
Original ATMEL chip ATMEGA8-16AU QFP-32 -
1x B0505S-1W 5V to 5V converter DC DC power module converter 1000VDC Isolation -
1x Base for MY4NJ Relay -
1.Location number : 20 2.pulse number : 20 3.operating life : 30000 times -
1x ER16M Collet nut for CNC Router Engraving Machine
-
ER20 13pcs SPRING COLLET SET Range 1mm to 13mm
-
1x ER20 type A Collet Clamping Nuts For CNC Milling Chuck Holder Lathe
-
Out of stock
ER25 16pcs SPRING COLLET SET Range 1mm to 16mm
-
1x KF129 3pin PCB terminal -
1x KF129 3pin PCB terminal -
[Main Parameter] Detection distance :4mm ± 10% Set distance:0~3.6mm Current: 5V 360mA, 12V 200mA, 24V 96mA, maximum instantaneous current 2A Delay distance:10% below of the detection distance Detection object:Magnetic metal(the detection distance decreases when it is non-magnetic metal) Stand detection object:Iron 15*15*1mm Response frequency:DC:0.5kHz Supply voltage:DC type:DC12V DC24V DC36V(5~36V)impulse(p-p)10% below Withstand voltage:AC1000V 50/60Hz 1min between charging part and housing Meterial:(Housing:Nickel plated brass) (Detection surface:ABS) Protection influence:IP67(IEC specification) This product can be applied to control relays, counters,PLC, etc.!
