-
GD-60S stem-mount levelling caster with a swivel wheel and an adjustable support foot. Supplied individually. -
Two-way motorised brass ball valve with a three-wire actuator, available in DN20, DN25, DN40 and DN50 sizes. -
Three-wire electric actuator for compatible ball valves, available in 220 V AC and 12–24 V DC versions. -
180ST AC servo motor and matching drive set, available in listed 5.7 kW and 7.3 kW configurations. -
Two-channel DIN-rail relay module with optocoupler isolation, selectable high- or low-level triggering and screw terminals. -
SSR-1 D4825 25 A solid-state relay for switching a single-phase AC load from a 3–32 V DC control signal. -
Two-channel PC817 optocoupler board for isolating low-frequency control signals, with independent channels and jumper-selectable output logic. -
36 V DC, 6 A power supply in the listed 200 W class for compatible CNC equipment and LED lighting. -
Blue-violet CNC laser engraving module supplied with connection cables and eyewear. -
4V220-08 double-solenoid pneumatic valve with a 24 V DC coil supply and a five-port, two-position configuration. -
Height-adjustable machine levelling foot with a rubber base, ball joint and threaded stem. -
AFR-2000 compressed-air filter and regulator with 1/4-inch ports, a pressure gauge and a mounting bracket. -
SN50T3 cyclone dust separator with a flanged base and a 55 mm outlet, for compatible vacuums and extraction systems. -
DB25 male D-sub breakout adapter with screw terminals for connecting individual wires without soldering. -
ZTS-series DC-controlled AC solid-state relay with aluminium heatsink, available in 25 A and 60 A versions. -
DPT10-23-30 two-speed inline ventilation fan for 100 mm ducting, with a 37 W single-phase motor. -
HG-series recirculating linear guide blocks in sizes 15, 20 and 25, available in HGH-CA square or HGW-CC flanged form. -
HGR-profile linear guide rail in sizes 15, 20 and 25, with 1 m, 2 m and 3 m lengths listed. -
LTE-1101J industrial LED warning beacon with an audible alarm for equipment and work-area signalling. -
JetCut CNC plasma torch height controller with UP/DOWN/OK and Step/Direction interfaces, arc-voltage feedback and Anti-Dive. -
LA38 three-position rotary selector switch for control panels, with one normally open and one normally closed contact. -
AR2000-series compressed-air pressure regulator with a 1/4-inch NPT connection, gauge and mounting bracket. -
NEMA 34 bipolar stepper motor with 4.5 N·m holding torque, 6 A rated phase current and a 78 mm body. -
OK86DL76-504A compact NEMA 34 stepper motor, with a 76 mm body, 4.5 Nm holding torque and 5 A rated phase current. -
Four-channel summing junction box for load cells, with individual signal trimming and one combined output. -
QGG 100 mm screw-type precision machine vise with hardened, ground steel jaws and a cross V-groove. -
QHK100 4-inch tilting machine vise with a 360° swivel base for angled workholding. -
Schneider LC1N1210 AC contactor rated at 12 A, with 24 V AC and 110 V AC coil variants listed. -
SFU1605 ball screw kit with a 400 mm overall length, 290 mm usable travel, BK/BF supports, DSG16 housing and an 8 × 10 mm coupling. -
Spoke-type load cell with a listed 1-tonne capacity for compatible force-measurement and weighing systems. -
XL4015 DC-to-DC step-down module with adjustable constant-voltage and constant-current modes, rated up to 5 A. -
Out of stock
24 V DC, 2.5 A DIN-rail power supply for compatible CNC equipment and control panels. -
Out of stock
24 V DC, 20 A power supply in the listed 500 W class for compatible CNC equipment and LED lighting. -
24 V DC, 25 A, 600 W power supply for compatible CNC equipment and LED lighting. -
Sale!
AC-to-DC power supply with a 12 V DC, 10 A output (120 W) for compatible CNC equipment and LED lighting. -
Sale!
24 V DC, 8.5 A power supply in the listed 200 W class for compatible CNC equipment and LED lighting.
