-
GD-60S stem-mount levelling caster with a swivel wheel and an adjustable support foot. Supplied individually. -
Two-way motorised brass ball valve with a three-wire actuator, available in DN20, DN25, DN40 and DN50 sizes. -
Three-wire electric actuator for compatible ball valves, available in 220 V AC and 12–24 V DC versions. -
180ST AC servo motor and matching drive set, available in listed 5.7 kW and 7.3 kW configurations. -
Two-channel DIN-rail relay module with optocoupler isolation, selectable high- or low-level triggering and screw terminals. -
SSR-1 D4825 25 A solid-state relay for switching a single-phase AC load from a 3–32 V DC control signal. -
Two-channel PC817 optocoupler board for isolating low-frequency control signals, with independent channels and jumper-selectable output logic. -
36 V DC, 6 A power supply in the listed 200 W class for compatible CNC equipment and LED lighting. -
Blue-violet CNC laser engraving module supplied with connection cables and eyewear. -
4V220-08 double-solenoid pneumatic valve with a 24 V DC coil supply and a five-port, two-position configuration. -
Height-adjustable machine levelling foot with a rubber base, ball joint and threaded stem. -
AFR-2000 compressed-air filter and regulator with 1/4-inch ports, a pressure gauge and a mounting bracket. -
SN50T3 cyclone dust separator with a flanged base and a 55 mm outlet, for compatible vacuums and extraction systems. -
DB25 male D-sub breakout adapter with screw terminals for connecting individual wires without soldering. -
ZTS-series DC-controlled AC solid-state relay with aluminium heatsink, available in 25 A and 60 A versions. -
DPT10-23-30 two-speed inline ventilation fan for 100 mm ducting, with a 37 W single-phase motor. -
HG-series recirculating linear guide blocks in sizes 15, 20 and 25, available in HGH-CA square or HGW-CC flanged form. -
HGR-profile linear guide rail in sizes 15, 20 and 25, with 1 m, 2 m and 3 m lengths listed. -
LTE-1101J industrial LED warning beacon with an audible alarm for equipment and work-area signalling. -
JetCut CNC plasma torch height controller with UP/DOWN/OK and Step/Direction interfaces, arc-voltage feedback and Anti-Dive. -
LA38 three-position rotary selector switch for control panels, with one normally open and one normally closed contact. -
AR2000-series compressed-air pressure regulator with a 1/4-inch NPT connection, gauge and mounting bracket. -
NEMA 34 bipolar stepper motor with 4.5 N·m holding torque, 6 A rated phase current and a 78 mm body. -
OK86DL76-504A compact NEMA 34 stepper motor, with a 76 mm body, 4.5 Nm holding torque and 5 A rated phase current. -
Four-channel summing junction box for load cells, with individual signal trimming and one combined output. -
QGG 100 mm screw-type precision machine vise with hardened, ground steel jaws and a cross V-groove. -
QHK100 4-inch tilting machine vise with a 360° swivel base for angled workholding. -
Schneider LC1N1210 AC contactor rated at 12 A, with 24 V AC and 110 V AC coil variants listed. -
SFU1605 ball screw kit with a 400 mm overall length, 290 mm usable travel, BK/BF supports, DSG16 housing and an 8 × 10 mm coupling. -
Spoke-type load cell with a listed 1-tonne capacity for compatible force-measurement and weighing systems. -
XL4015 DC-to-DC step-down module with adjustable constant-voltage and constant-current modes, rated up to 5 A. -
Out of stock
24 V DC, 2.5 A DIN-rail power supply for compatible CNC equipment and control panels. -
Out of stock
24 V DC, 20 A power supply in the listed 500 W class for compatible CNC equipment and LED lighting. -
24 V DC, 25 A, 600 W power supply for compatible CNC equipment and LED lighting. -
Sale!
AC-to-DC power supply with a 12 V DC, 10 A output (120 W) for compatible CNC equipment and LED lighting. -
Sale!
24 V DC, 8.5 A power supply in the listed 200 W class for compatible CNC equipment and LED lighting.
-
DIN-rail power supply with listed 5 V DC, 3 A and 24 V DC, 0.6 A output configurations. -
NDR-120-24 DIN-rail AC-to-DC power supply with a 24 V DC, 5 A output (120 W) for CNC and control-panel applications. -
60 V DC, 6.7 A power supply in the listed 400 W class for compatible CNC equipment and LED lighting. -
JetCut CNC plasma torch height controller with UP/DOWN/OK and Step/Direction interfaces, arc-voltage feedback and Anti-Dive.
-
ALPHA THC SD uses arc-voltage feedback to adjust CNC plasma torch height through Step/Direction and includes an Anti-Dive input. -
AQTRONIC DSC3 digital ohmic sensor for CNC plasma cutting, with 100 sensitivity settings and a 24 V DC supply. -
GS937D digital soldering station with LED temperature display, adjustable temperature and a replaceable iron tip and heater. -
The YIHUA 936D is a digital soldering station with a replaceable tip and heating element, antistatic design and a slim handpiece.
-
The YIHUA 937D is a digital soldering station with a replaceable tip and heating element, antistatic design and a slim handpiece.
-
ATTEN ST-862D 1,000 W hot-air rework station with adjustable temperature and airflow and three preset channels for PCB work. -
60AST-A1C01930 three-phase closed-loop servo kit with a 600 W motor, 1.91 Nm rated torque and a matching drive. -
60AST-M01930 closed-loop servo motor and drive kit, rated 600 W, 1.91 Nm and 3,000 rpm. -
Out of stock
High torque closed loop servo motor. DIY CNC Machines,Milling machines,lathe,pick and place machines.600W 1.91 N.M Download Manual (PDF) -
220 V servo kit with a 2.6 kW motor rated at 2,500 rpm and 10 N·m, a T3M-30A drive and 3 m motor and encoder cables. -
LST100 BT30 ATC spindle for CNC machines, rated at 3.2 kW and up to 12,000 rpm, with pneumatic tool change. -
T12 trapezoidal lead screw with a brass nut for 3D printers and CNC mechanisms, available in 500 mm and 1,000 mm lengths. -
4-inch machine vise with a cast-iron body, steel jaws and an opening of up to 100 mm for milling and drilling. -
46-piece ratchet tool set supplied in a thermoplastic storage case for workshop and vehicle maintenance. -
5-inch indexing rotary table with a 125 mm chuck for horizontal or vertical mounting. -
NEMA 23 closed-loop stepper kit with a 3.0 Nm motor, HBS57HD driver and 8 m cabling. -
6-inch indexing rotary table with a 160 mm YTUM three-jaw chuck for machining and workpiece indexing. -
110ST-M06030 AC servo kit, listed at 1.8 kW, 6 Nm and 3,000 rpm, with drive and connection cables. -
Vertical centrifugal machine coolant pump rated at 40 W, with a listed maximum flow of 12 L/min and a maximum head of 3.5 m. -
57 mm brushless DC motor kit with a ZM6405E drive, rated at 24 V DC, 100 W, 3,000 rpm and 0.32 N·m. -
21 V brushless cordless impact drill with a 2.0 Ah lithium-ion battery, a 2–10 mm metal chuck and a listed torque of 85 N·m. -
BT30-90 belt-driven CNC spindle with pneumatic tool change, a 90 mm housing and a listed speed of 6,000 rpm. -
CGX dual-rail linear module with an SFU1610 ball screw, 200 mm of usable travel and a 3.0 A NEMA 23 stepper motor. -
CW-3000 recirculating water cooler with a fan-cooled radiator and a 9 L tank for compatible CNC spindles and CO₂ laser tubes. -
120 W vertical centrifugal machine coolant pump for 380 V three-phase power, with a listed maximum flow of 50 L/min. -
J3GA400 industrial metal profile cutting machine with a 2.2 kW motor and a cast-iron body and base. -
SANOU K12-200 self-centring four-jaw lathe chuck with a 200 mm body and hardened steel jaws. -
SANOU 80 mm self-centring four-jaw chuck with hardened steel jaws for compatible mini metal lathes. -
Integrated NEMA 23 closed-loop stepper motor for CNC axes, with a listed torque of 3.6 N·m and a 20–48 V DC supply range. -
50 L portable oil-free air compressor with two 1,280 W motors, a listed airflow of 334 L/min and a listed pressure of 8 bar. -
Optical linear scale for compatible DRO systems, available with nominal measuring travel from 100 to 700 mm. -
MAL-series pneumatic cylinder with an aluminium-alloy body and a single piston rod. -
Digital industrial platform scale with a 150 kg capacity, 10 g display increments and a 30 × 40 cm stainless-steel weighing surface. -
TPR-3005-2D dual-channel adjustable bench DC power supply, with a listed output range of 0–30 V and 0–5 A. -
Belt-driven, twin-cylinder air compressor with an 80 L tank, a 2.2 kW motor and a listed pressure of 8 bar. -
Out of stock
VORTEX WL-2200 centrifugal blower for pressure or vacuum service, rated at 2.2 kW for a 380 V three-phase supply. -
80 W IP68 submersible water pump for 220 V AC, with a listed flow rate of 3,500 L/h and a maximum lift of 3.5 m. -
YH200 LED digital readout for milling machines, lathes, grinders and boring machines, with 2- and 3-axis configurations listed. -
ZX7-250 compact 220 V IGBT inverter for DC stick welding, with a digital current display, hot start and anti-stick. -
High torque closed loop servo motor. DIY CNC Machines,Milling machines,lathe,pick and place machines.1000W 3.2 N.M -
90ST-M04025 1 kW AC servo kit with a 2,500 rpm motor, matching drive and 3 m motor and encoder cables. -
FQD 3.2 kW water-cooled CNC spindle with an ER20 collet interface and a listed speed of 24,000 rpm. -
Out of stock
FQD 4.5 kW square air-cooled CNC spindle with an ER32 collet interface and a listed speed of 24,000 rpm. -
Female-thread spherical rod end for articulated linkages, with M6 or M8 thread options and left- or right-hand variants.
